For the complete documentation index, see llms.txt. This page is also available as Markdown.

Yealink DECT System

Integrate your Yealink DECT system with your PASCOM cloud phone system.

Yealink W52P

Supported Endpoints

|Models| |---|---| |W60|W70|

Overview

The Yealink DECT solution is ideally suited for small businesses who require only a small number of mobile handsets (maximum 5).

Add a new DECT Base

1. Connect DECT System

Integrate the DECT system into your network.

2. Find the MAC Address

The MAC address can be found on the base station or on an enclosed memo.

3. Add Base Station

Log in to your PASCOM System and add a new basestation under Gateways > Gatewaylist of the type Gateway: Yealink.

Enter the previously determined MAC address of the DECT system in the Mac address field.

4. Apply Jobs

After saving the changes, a job box appears (above). Start the job with a click on the button Apply.

5. Find the Provision URL

Check the DECT System in the device list and select Aktion > Provisioning URL. Copy that URL to the clipboard.

6. Enter the Provisioning URL to DECT base station admin UI

Enter the just copied provisioning URL on the DECT System's Web UI.

Yealink Dect GUI

Click on Apply and then on Reboot.

Add and Assign Handsets

It is only possible to register a maximum of 5 handsets per base station.

Under Devices > Device List > Add, select the option Via Yealink DECT Gateway: handset. Next you will need to update the following settings: Einstellungen müssen Sie vornehmen:

Settings
Description

Connected to

Select the DECT base station.

Assignment

In this tab, you can assign users.

Register Handsets to the DECT Base Station

The handsets will automatically connect themselves to the DECT base station as soon as they are placed in the charging stations and the provisioning of the Base Station has been applied.

It is possible that the DECT base station may require a restart.

Last updated

Was this helpful?