For the complete documentation index, see llms.txt. This page is also available as Markdown.

Snom Conferencing System

Integrate your Snom Conference System with your PASCOM IP PBX solution.

Snom C520

Supported Endpoints

Models

Snom C520

Preparation

A functioning DHCP server is mandatory. Connect the conference system to your network. Make a note of the ** IP address ** that the conference system received from the DHCP server.

Create a new Basic Configuration Template

The next step is to build a new basic configuration for the conference system. To do this, go to the PASCOM WEB GUI on Devices> Basic configuration

Duplicate the basic configuration Empty Generic Profile and give it a name e.g. SNOM C520 conference. Select the new basic configuration and click on Edit> Configuration.

Now replace the existing code with the following code snipped:

Save the basic configuration.

Create/Add the Conference System

Insert under Devices> Device list a new device of type IP-Telefon: Hersteller beliebig oder Softphone. Now select the new basic configuration you created earlier (SNOM C520 conference).

Under the tab Assign you give the conference device an user. Finally save!

Provisioning the Conference System

Check the conference system in the device list and go to Action> Provisioning URL where you can copy the provisioning URL to the clipboard.

With the IP address noted at the beginning, go to the web interface of your SNOM conference system. Under Servicing> Provisioning you will find the Server URL field in which the Provisioning URL must be stored. Click on Save and restart the conference system by clicking on Reboot.

Snom C520

Last updated

Was this helpful?