Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Generic SIP Endpoints

How to integrate SIP devices from non-officially supported manufactures into your PASCOM cloud phone system

Restrictions

Non supported phones can not be automatically configured nor be configured with the PASCOM menu on the endpoint.

Remote CTI control via the PASCOM App is only possible in a restricted form.

Endpoint Requirements

In order for a SIP device to operate with the PASCOM server, the following functions are necessary:

  • SIP via TCP/TLS (encrypted signaling)

  • SRTP (encrypted voice data)

  • Outbound Proxy (send data via the Session Border Controller)

Preparation and login data

Setting
Example value
Description

Registrar, SIP-Server

pascom

Name of the phone system

Proxy, Outbound-Proxy

pascom.cloud

DNS name or Server IP address

SIP-Port

TCP 5061

TLS SIP Port

Username, Identity, Authuser

my-telephone-name

Device login name

Password

*

Device password, not the user's password!

SIP TLS and SRTP

Read the SIP endpoint handbook regarding how to activate SIP TLS and SRTP. This could involve multiple setting configs.

Create a new Basic Configuration Template

The next step is to build a new basic configuration for the SIP device. To do this, go to the PASCOM WEB GUI on Devices > Basic configuration

Duplicate the basic configuration Empty Generic Profile and give it a name e.g. My Yealink Devices. Select the new basic configuration and click on Edit > Configuration.

You have to adapt the following code part to your device-parameters. The listed variables are used to automatically fill in the correct login/server data.

Save the basic configuration.

Apply Jobs

After saving your changes, an entry will appear in the job box (top centre of the window). Start the job by clicking apply or the green tick.

Create/Add the SIP Device

Insert under Devices > Device list a new device of type IP-Telefon: Hersteller beliebig oder Softphone. Now select the new basic configuration you created earlier (My Yealink Devices).

Under the tab Assign you give the SIP device an user. Finally save!

Provisioning on the SIP Device

Check the IP Device in the device list and go to Action > Provisioning URL where you can copy the provisioning URL to the clipboard.

Each SIP device has its own web interface. How to get there, please refer to the instructions of the respective manufacturer. The Provisioning URL usually has to be set in the Servicing settings of the device at the server URL. After applying the changes and a restart / reboot of the device, the settings are automatically transferred to the device via the provisioning URL.

Test Call

On the SIP endpoint, please dial *100. This should call the PASCOM Voicemail box and you should here the mailbox prompts.

Last updated

Was this helpful?